To accurately set the time on your watch, follow these steps:. Pull the Crown to the 1st Click Position: Ensure the seconds hand is at the 12 o'clock position before pulling the crown. Set the Time: Rotate the crown to adjust the hour and minute hand

<h1 id="h_01J68SAN69HW00KRGPPB1FAESV">How to Set a GLD Alpha Era Watch</h1>
<h2 id="h_01J68ST6VPAHDCDYG64S5M7ES9">GLD Alpha Era Watch Setup Guide: Time-Only Display</h2>
<h3 id="h_01J68RZKB0RVDHFHRFF1CJ4TG2">Step 1: Familiarize Yourself with the Watch Components</h3>
<ul>
<li>The Hour Hand on a watch is the shortest and broadest hand. It completes a full rotation on the dial every 12 hours.</li>
<li>The Minute Hand is also broad and slightly longer than the Hour Hand. It completes a full rotation around the dial every 60 minutes.</li>
<li>The Second Hand is the longest and thinnest hand. It completes a full rotation every 60 seconds.</li>
<li>The Crown has two positions: the Normal Position, which is the default for regular use, and the 1st Click Position, which is used for setting the time.</li>
</ul>
<h3 id="h_01J68RZKB0CE4HAKW2H8MNR4GG">Step 2: Setting the Time</h3>
To accurately set the time on your watch, follow these steps:
<ul>
<li>
Pull the Crown to the 1st Click Position: Ensure the seconds hand is at the 12 o&apos;clock position before pulling the crown.
</li>
<li>
Set the Time: Rotate the crown to adjust the hour and minute hands to the correct time.
</li>
<li>
Return the Crown to Normal Position: Push the crown back to the Normal Position after setting the time.
</li>
</ul>
<hr>
<h2 id="h_01J68ST6VPGRSWNWHBAAYCP7YR">GLD Alpha Era Watch Setup Guide: Time, Date, and Day Display</h2>
<h3 id="01J68T2A109464E17GC5AR044Y">Step 1: Familiarize Yourself with the Watch Components</h3>
<ul>
<li>The Hour Hand on a watch is the shortest and broadest hand. It completes a full rotation on the dial every 12 hours.</li>
<li>The Minute Hand is also broad and slightly longer than the Hour Hand. It completes a full rotation around the dial every 60 minutes.</li>
<li>The Second Hand is the longest and thinnest hand. It completes a full rotation every 60 seconds.</li>
<li>
The Date Indicator shows the current date. It advances once every 24 hours, usually at midnight.
</li>
<li>
The Day Indicator displays the current day of the week. Like the Date Indicator, it advances once every 24 hours.
</li>
<li>
The 24-Hour Indicator helps distinguish between AM and PM hours by completing one full rotation every 24 hours.
</li>
<li>
The Crown has three positions: the Normal Position, which is the default for regular use; the 1st Click Position, used for quickly changing the date; and the 2nd Click Position, used for setting the time and day.&quot;
</li>
</ul>
<h3 id="01J68T9G7TSXE8CM71YCTDHB5G">Step 2: Setting the Time and Date</h3>
<ul>
<li>
Pull the Crown to the 2nd Click Position: Ensure the seconds hand is at the 12 o&apos;clock position before pulling the crown.
</li>
<li>
Set the Day and Time: Rotate the crown to set the day of the week, then adjust the hour and minute hands to the correct time. Ensure the AM/PM is correctly set (12pm/24am).
</li>
<li>
Set the Date: Push the crown to the 1st Click Position. Then rotate the crown counterclockwise to adjust the date.
</li>
<li>
Return the Crown to Normal Position: Push the crown back to the Normal Position after all settings are complete.
</li>
</ul>
IMPORTANT: Avoid setting the date between 10:00 PM and 2:00 AM to prevent potential issues with the date change. If necessary, change the time to outside this range, adjust the date, and then reset the correct time.
&#xA0;
You can also refer to the diagram below:
<img alt="blobid0.png" src="https://hsfiles.gorgias.help/gm/help-centers/83019/attachment/bc439bdb-3fd5-4b53-b25d-7905b757759e.png">

How to Set a GLD Alpha Era Watch

Set up a clean workspace - Gather a soft cloth, the watch link removal tool, and the pin pusher that came with your order. Choose the links to remove and locate the pins on the side of the band. Follow the arrows inside the links, which indicate the

<h1 id="h_01J68Q8R9CHMEMHTAVPSZH3TAW">How to Remove Links from Your GLD Watch</h1>
<h4 id="h_01J68R5P22659TEPN75WAR4WMT">Follow these steps to remove links from your watchband and adjust its size:</h4>
&#xA0;
<h3 id="h_01J68R5H9T9VTB7GT9EFTJT9HX">Step 1. Prepare</h3>
Set up a clean workspace - Gather a soft cloth, the watch link removal tool, and the pin pusher that came with your order.
<h3 id="h_01J68R4HDV6DHMH46Q39NZ3R3K">Step 2. Identify the Links to Remove</h3>
Choose the links to remove and locate the pins on the side of the band. Follow the arrows inside the links, which indicate the direction for removing and re-inserting pins.
<h3 id="h_01J68R4MFFKW8EJ30RZR6T475S">Step 3. Remove the Pin</h3>
Use the watch link removal tool to push the pin out slightly in the direction of the arrow. Then use the pin pusher to fully remove the pin, tapping lightly if needed.
<h3 id="h_01J68R4RAA1JKN5GH4RCAJP61D">Step 4. Detach the Link</h3>
Separate the unwanted link once the pin is removed.
<h3 id="h_01J68R4WSXA671Z9KAKQQ38W68">Step 5. Reassemble</h3>
Align the remaining links and insert the pin in the direction of the arrow. Tap lightly to push the pin in almost all the way. Then use the watch link removal tool to secure it in place and ensure it is properly aligned.
<h3 id="h_01J68R509BG8F5DM8KYAYEHH0N">Step 6. Check Fit</h3>
Try on the watch to ensure it fits and adjust if necessary by repeating the steps above.
&#xA0;
IMPORTANT: If you&apos;re unsure or uncomfortable performing these steps, consider visiting a professional jeweler for assistance. These services can typically be free, if not with a minimal charge of $10.

How to Remove Links from Your GLD Watch

These watches feature an automatic winding mechanism, which winds itself with regular wear. However, you may also manually wind the watch to ensure optimal performance. Ensure the Crown is in the Normal Position: This is the default position of the c

<h1 id="h_01J68S1MNFZHHQ3QPSFQNB67G6">How to Set a GLD Skeleton Watch</h1>
<h3 id="h_01J68RZKB0RVDHFHRFF1CJ4TG2">Step 1: Familiarize Yourself with the Watch Components</h3>
<ul>
<li>The Hour Hand on a watch is the shortest and broadest hand. It completes a full rotation on the dial every 12 hours.</li>
<li>The Minute Hand is also broad and slightly longer than the Hour Hand. It completes a full rotation around the dial every 60 minutes.</li>
<li>The Second Hand is the longest and thinnest hand. It completes a full rotation every 60 seconds.</li>
<li>The Crown has two positions: the Normal Position, which is the default for regular use, and the 1st Click Position, which is used for setting the time.</li>
</ul>
<h3 id="h_01J68RZKB0S8PR5ATEE73R0KQX">Step 2: Winding the Mainspring</h3>
These watches feature an automatic winding mechanism, which winds itself with regular wear. However, you may also manually wind the watch to ensure optimal performance.
<ul>
<li>
Ensure the Crown is in the Normal Position: This is the default position of the crown when not setting the time.
</li>
<li>
Wind the Mainspring: Turn the crown clockwise several times while in the Normal Position. This will wind the mainspring and start the watch movement.
</li>
</ul>
<h3 id="h_01J68RZKB0CE4HAKW2H8MNR4GG">Step 3: Setting the Time</h3>
To accurately set the time on your watch, follow these steps:
<ul>
<li>
Pull the Crown to the 1st Click Position: Gently pull the crown out until you feel it click into place. This is the 1st Click Position.
</li>
<li>
Set the Time: Rotate the crown to move the hour and minute hands to the desired time.
</li>
<li>
Secure the Crown: After setting the time, push the crown back to the Normal Position to secure it.
</li>
</ul>
Your GLD Skeleton Watch is now set up and ready to wear. Regular wear will keep the watch fully wound and operating smoothly. If not in regular use, please manually wind your watch on occasion.
&#xA0;
You can also refer to the diagram below:
&#xA0;
<img alt="blobid1.jpg" src="https://hsfiles.gorgias.help/gm/help-centers/83019/attachment/501fb194-71ae-460d-ac65-9b59fe9c84a8.jpg">

How to Set a GLD Skeleton Watch

Send us an email - Support@gld.com
Email Support 24/7

Watches

Watch Information

How do I open my Clasp?

Do your Pendants come with a Chain/Necklace?

General Product Questions

How to Determine Your GLD Ring Size

How to Determine Your GLD Bracelet Size

How to Determine Your GLD Chain/Necklace Size

Is The Jewelry Made With Real Gold/Silver/Rhodium?

What kind of materials do you offer?

How do I clean and protect my jewelry?

Product Materials, Care, and Sizing

Product Information

How do I find more information about my order?

My Order

Order Information

What are International Import Fees/Taxes?

What do I do if my Package is Returned to Sender?

Why is my Package Delayed?

When will my Order be Delivered?

What is GLD's Shipping Policy?

Shipping Policies and Timeframes

Shipping Information

How do promotions and discounts work?

Promotions and Discounts

Discount Information

How can I find our more Information on GLD's Solid Gold Jewelry?

Solid Gold Products

Solid Gold Information

How can I find our more Information on GLD's Custom Jewelry?

Custom Products

Custom Information

How do I Follow Up on the Status of an Existing Exchange?

How do I Follow Up on the Status of an Existing Return?

What is GLD's Policy for Exchanges?

What is GLD's Policy for Returns?

What is GLD's Timeframe for Returns?

How to Return or Exchange an Item at GLD

Return and Exchange Policies

Return and Exchange Information

How do I Follow Up on the Status of an Existing Repair?

What is GLD's Lifetime Warranty Policy?

What is GLD's Policy for Repairs?

How do I Follow Up on the Status of an Existing Lifetime Warranty Claim?

Warranty and Repair Policies

Warranty and Repair Information

GLD Influencer and Brandbassador

Business Inquiries

Business Information

How do I Email GLD Support?

How do I Call GLD Phone Support?

How do I claim my prize in GLD's Tattoo Tuesday?

What Is Vermeil?

Is Your Gold Plating Just Like Any Other Company's?

What methods of payment are accepted?

Frequently Asked Questions

General